Resetting your Honeywell thermostat can resolve various issues or restore default settings. The reset procedure varies depending on the model. If you need further assistance we offer 24/7 services.
At this time read below instructions to follow.

Here’s a general guide for some common Honeywell thermostat series:

1. T5+/T5/T6 Series:

• Factory Reset:

  1. Press and hold the Menu button.
  2. Navigate to Reset using the arrow buttons and select it.
  3. Choose Factory Reset and confirm.
  4. The thermostat will reset to its original settings.

• Wi-Fi Reset:

  1. Press and hold the Menu button.
  2. Navigate to Wi-Fi and select it.
  3. Choose Change Network and follow the prompts to connect to a new Wi-Fi network.

2. 6000 Series (e.g., TH6320WF1, RTH6580WF):

• Factory Reset:

  1. Press and hold the Fan and Up arrow buttons simultaneously.
  2. Change the left number to 90 and the right number to 1 using the arrow buttons.
  3. WIthout delay press Done to complete the reset.

• Wi-Fi Reset:

  1. Press the System button.
  2. Press and hold the blank box in the center of the screen.
  3. Change the left number to 0900 and the right number to 0.
  4. Therefore press Done to reset the Wi-Fi settings.

3. 8000 Series (e.g., TH8320WF, RTH8500):

• Factory Reset:
  1. Press the System button.
  2. Press and hold the center blank button until the screen changes.
  3. Use the arrow buttons to set the left number to 0710 and the right number to 1.
  4. Press Done to reset the thermostat.

4. 9000 Series (e.g., RTH9580WF, RTH9585WF):

• Factory Reset:
  1. Press the Menu button.
  2. Navigate to Preferences and select it.
  3. Choose Restore Factory Defaults and confirm your selection.
  4. Lastly the thermostat will reset to its default settings.

5. Non-Programmable Thermostats (e.g., 1000 and 2000 Series):

• Factory Reset:

  1. Turn off the thermostat.
  2. Flip the circuit breaker controlling the thermostat to the off position.
  3. Remove the thermostat from its mounting plate.
  4. To conclude take out the batteries.
  5. Reinsert the batteries in reverse polarity (negative to positive and positive to negative) for about five seconds.
  6. Remove the batteries and reinsert them correctly.
  7. Reattach the thermostat to the mounting plate.
  8. Finally turn the circuit breaker back on.

Important Note: Resetting your thermostat will erase all programmed settings, including schedules and Wi-Fi configurations. However after the reset, you’ll need to reconfigure these settings. To emphaszie if you’re unsure about performing a reset or encounter issues afterward, consult the user manual specific to your thermostat model or contact Honeywell customer support for assistance.